FDX-B Transponder 2.12*12mm RFID Glass Tag Injectable Animal PET ID Microchip are used in numerous electronic applications where discrete electronic components must be protected, isolated from the environment or sealed.
FDX-B Transponder 2.12*12mm RFID Glass Tag Injectable Animal PET ID Microchip are used in numerous electronic applications where discrete electronic components must be protected, isolated from the environment or sealed. Some applications include reed switch bodies, fuse bodies, diode glass sleeve packages, lamps, transponders, flat panel displays and thermistors. The function of the glass varies by application, however, it is used many times to electrically insulate, passivate components or as a hermetic seal.
Typical applications include pallet and tool identifi cation, asset tracking, automobile immobilizer systems, animal identifi cation and many others.
1.Resistant to most chemicals
3.Supply with sterilized syringes
5.Available in several sizes and frequencies
|Case Material||Cylindrical Bio-glass|
|Reading Range||30cm max( Reader dependent)|
|Write Endurance||> 1,000,000 cycles|
|Operating temperature||-20 ~ 50℃|
|Storage temperature||-40 ~ 70 ℃|
|Reading Range||0-5cm(depends on the reader and antenna)|
|Package||Type:Packed by foam|
|Data Tetention||More than 20 years|
|Power Source||No Battery Required|
|EMC||Not affected by Normal Electromagnetic Interference or X-Rays|
|Signal Penetration||No known Blockage by non-magnetic material|
|Syringe Sterilization||EO gas|
|Syringe Length||120mm ± 2mm|
|Syringe Width||50mm ± 1mm|